JimInCollie Posted May 12, 2022 Share Posted May 12, 2022 I have a 6 tap keezer (pictured) and keep my CO2 bottle INSIDE the keezer. I do this because in my earlier days someone recommended I do so. However, it has occurred to me that if I had it OUTSIDE the keezer there would be these advantages: To turn the gas ON or OFF I would not have to open the lid of the keezer and reach in among all the tubing to do so. It would be much quicker, if you were only having one pint, to turn the gas ON, pour the beer, and turn it off again; much quicker to put the keezer to bed at the end of a session - just turn the gas off! or, is there some technical reason for keeping the cylinder cold? Also, would it be better for the regulator gauges to be warm and dry outside the keezer than misty, cold, and maybe damp inside the keezer? I look forward to your thoughts. Many thanks, Jim Pictured is my wife adding the finishing touches to the paintwork of my homemade keezer. Link to comment Share on other sites More sharing options...
Otto Von Blotto Posted May 12, 2022 Share Posted May 12, 2022 I've always had mine outside the fridge simply because there's no room inside it and it would be completely impractical for me to do that even if it did. I have it connected to a manifold bolted to the bar next to the fridge with the lines going in through the back. This way I can turn gas off to individual kegs, change pressure etc. without opening it or disturbing the kegs. Link to comment Share on other sites More sharing options...
JimInCollie Posted May 12, 2022 Author Share Posted May 12, 2022 14 minutes ago, Otto Von Blotto said: I've always had mine outside the fridge simply because there's no room inside it and it would be completely impractical for me to do that even if it did. I have it connected to a manifold bolted to the bar next to the fridge with the lines going in through the back. This way I can turn gas off to individual kegs, change pressure etc. without opening it or disturbing the kegs. Thanks Otto My manifold is on the inside as you can see in the picture below. If I had one tube coming in from outside and no gas cylinder inside I could tidy up my plumbing and have more room for kegs. Many thanks, Jim Link to comment Share on other sites More sharing options...
Shamus O'Sean Posted May 12, 2022 Share Posted May 12, 2022 5 hours ago, JimInCollie said: My manifold is on the inside as you can see in the picture below. If I had one tube coming in from outside and no gas cylinder inside I could tidy up my plumbing and have more room for kegs. Being inside keeps things a bit tidier on the outside. As far as I know, there is no technical reason why it is better to have the gas bottle/regulator inside the fridge/freezer. Mine is on the outside, like Otto's, and for the same reason. 2 Link to comment Share on other sites More sharing options...
stquinto Posted May 12, 2022 Share Posted May 12, 2022 I keep my gas bottle outside of the fridge (not freezer) as it is a 10kg one that is too tall. When I had a 6kg one I also kept it out as it took up too much space. I also read ( John Palmer, How to Brew book) that the regulator might get damaged from the condensation if it is kept inside. 2 Link to comment Share on other sites More sharing options...
ben 10 Posted May 13, 2022 Share Posted May 13, 2022 Bottle outside, manifold inside. Makes for easy swap when I run out. I have a small bottle to use whn the big one is out for a refill. 3 Link to comment Share on other sites More sharing options...
Dustin Frothman Posted May 14, 2022 Share Posted May 14, 2022 8 hours ago, interceptor said: Bottle outside, manifold inside. Same for me. 2 gas bottles on the back. One for carbonating and one for serving. 1 Link to comment Share on other sites More sharing options...
kmar92 Posted May 14, 2022 Share Posted May 14, 2022 Bottle outside for me along with the manifold, I do not see any reason to put it inside as it is just taking up space that could be occupied by a keg. Also a moist cold environment is probably not ideal for regulators. 3 Link to comment Share on other sites More sharing options...
Red devil 44 Posted May 20, 2022 Share Posted May 20, 2022 Gas cylinder outside, More space inside Also you can’t have a Regulator inside as they don’t like condensation of any kind as the diaphragm can leak gas past and then cause gas flow fluctuations & false readings on the gauge. 3 Link to comment Share on other sites More sharing options...
Classic Brewing Co Posted May 20, 2022 Share Posted May 20, 2022 Mine is on the inside ATM but soon it will be on the outside as I will be getting 3 more kegs inside, bloody lot of stuff just to pour a beer isn't there - what have I done 1 Link to comment Share on other sites More sharing options...
Aussiekraut Posted May 20, 2022 Share Posted May 20, 2022 On the kegerator it is outside but I have been known to put a small one into a fridge, if I want to carb up a keg and there is no room in the kegerator. 1 Link to comment Share on other sites More sharing options...
JimInCollie Posted June 5, 2022 Author Share Posted June 5, 2022 On 5/20/2022 at 2:28 PM, Classic Brewing Co said: Mine is on the inside ATM but soon it will be on the outside as I will be getting 3 more kegs inside, bloody lot of stuff just to pour a beer isn't there - what have I done I know how you feel. I just paid off my credit card, the one I used to buy the 6x taps for my keezer, and some extra kegs, and other bits and pieces. I'm wondering how much beer I will have to brew, and what the savings will be compared with store-bought beer, to make it worth doing? Worthwhile financially, I mean. It is a hobby after all, and I'm learning heaps which is also an asset, and the beer is usually better than most store-bought beers, anyway, so I'm not whingeing, just need to put the credit card away is all. 1 Link to comment Share on other sites More sharing options...
JimInCollie Posted June 5, 2022 Author Share Posted June 5, 2022 On 5/14/2022 at 3:38 AM, interceptor said: Bottle outside, manifold inside. Makes for easy swap when I run out. I have a small bottle to use whn the big one is out for a refill. Hi Interceptor. "Makes for easy swap when I run out" - Excellent point! Thanks, Jim 1 Link to comment Share on other sites More sharing options...
Classic Brewing Co Posted June 5, 2022 Share Posted June 5, 2022 42 minutes ago, JimInCollie said: I know how you feel. I just paid off my credit card, the one I used to buy the 6x taps for my keezer, and some extra kegs, and other bits and pieces. I'm wondering how much beer I will have to brew, and what the savings will be compared with store-bought beer, to make it worth doing? Worthwhile financially, I mean. It is a hobby after all, and I'm learning heaps which is also an asset, and the beer is usually better than most store-bought beers, anyway, so I'm not whingeing, just need to put the credit card away is all. Looks awesome mate, enjoy. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now