Jump to content
Coopers Community

BEER TAP HANDLES


Recommended Posts

I am on the hunt for some decent Beer Tap Handles, sick of all of the junk on ebay, some of there stuff is secondhand but I am thinking of ordering some of these from America - if they fit the NukaTap, I believe they are 3/8" thread, does anybody know if that is correct.

I have emailed the Company but haven't heard back yet. These are 12" long so they would be impressive looking if they fit.

Torpedo IPA tap handle

  • Like 2
Link to comment
Share on other sites

6 minutes ago, Classic Brewing Co said:

Thanks @kmar92I thought they were, I just need to find out what thread these handles are. Cheers.

I think that 3/8" 16 UNC is a worldwide standard for beer tap handles so they should be fine.

Link to comment
Share on other sites

4 hours ago, Classic Brewing Co said:

I am on the hunt for some decent Beer Tap Handles, sick of all of the junk on ebay, some of there stuff is secondhand but I am thinking of ordering some of these from America - if they fit the NukaTap, I believe they are 3/8" thread, does anybody know if that is correct.

I have emailed the Company but haven't heard back yet. These are 12" long so they would be impressive looking if they fit.

Torpedo IPA tap handle

They are cool! 🚀 

Link to comment
Share on other sites

On 6/10/2022 at 3:05 PM, Classic Brewing Co said:

I am on the hunt for some decent Beer Tap Handles, sick of all of the junk on ebay, some of there stuff is secondhand but I am thinking of ordering some of these from America - if they fit the NukaTap, I believe they are 3/8" thread, does anybody know if that is correct.

I have emailed the Company but haven't heard back yet. These are 12" long so they would be impressive looking if they fit.

Torpedo IPA tap handle

I have managed to source these taps from the USA, attached a couple of photos from the young lady who served me, they look really great & are currently in transit.

They are 12" tall, I would have liked an assortment of different styles but this was a one off deal & will definitely do for now.

IMG_20220614_141442.jpg

IMG_20220614_141512.jpg

  • Like 4
Link to comment
Share on other sites

On 6/10/2022 at 3:05 PM, Classic Brewing Co said:

I am on the hunt for some decent Beer Tap Handles, sick of all of the junk on ebay, some of there stuff is secondhand but I am thinking of ordering some of these from America - if they fit the NukaTap, I believe they are 3/8" thread, does anybody know if that is correct.

I have emailed the Company but haven't heard back yet. These are 12" long so they would be impressive looking if they fit.

Torpedo IPA tap handle

Well the lovely people from Sierra Nevada have just sent me these, they fit !! 😊 I cannot wait until I get the other 4 Taps fitted. I am a very Happy Camper 😎

A couple of stickers & bottle openers too !!

20220620_100021.thumb.jpg.7ac3c14fa3e2bb1a7b8dadcb7cef4829.jpg20220620_100115.thumb.jpg.74ea88e6b960a2db8d831ffce2d4bb83.jpg20220620_100155.thumb.jpg.6292726191b21a5cbf464fe8f88baf8d.jpg

 

  • Like 4
Link to comment
Share on other sites

11 minutes ago, Otto Von Blotto said:

That looks good mate. 

My favourite one I actually got off eBay but it's a decent one. I use it whenever I have my red ale on tap.

PSX_20211002_131124.thumb.jpg.6bd99f7aad3a83d34109549056ba0975.jpg

Oh WOW that's a beauty, the Pils looks good to !! I want to have different ones but this was a package deal - I had to buy 6 but I am still hunting for others, I didn't have too much luck on Gumtree or ebay too much BS & scammers.

  • Like 1
Link to comment
Share on other sites

Just now, Otto Von Blotto said:

The pilsner urquell one came off eBay as well I think. I got them ages ago, along with a few others, I have a Guinness 250th anniversary handle among the collection too 

They certainly look the biz, I will keep searching, something is bound to turn up, I am just relieved the fit more than anything !!

  • Like 1
Link to comment
Share on other sites

8 minutes ago, Otto Von Blotto said:

I think like what was posted earlier, the threads are pretty much standard across the board 

Yeah you are right, I found out from @kmar92 Thanks Mate, that,  the threading for tap handles is 3/8"-16 UNC (coarse). my research tells me it stands for Unified Fine Threads but I will stand corrected.

Cheers.

Link to comment
Share on other sites

5 hours ago, Classic Brewing Co said:

Well the lovely people from Sierra Nevada have just sent me these, they fit !! 😊 I cannot wait until I get the other 4 Taps fitted. I am a very Happy Camper 😎

A couple of stickers & bottle openers too !!

20220620_100021.thumb.jpg.7ac3c14fa3e2bb1a7b8dadcb7cef4829.jpg20220620_100115.thumb.jpg.74ea88e6b960a2db8d831ffce2d4bb83.jpg20220620_100155.thumb.jpg.6292726191b21a5cbf464fe8f88baf8d.jpg

 

Looking good Phil

I'm sure you will be able to off load a couple of the Taps, as you pick up others!

  • Like 1
Link to comment
Share on other sites

On 6/20/2022 at 4:02 PM, Classic Brewing Co said:

Yep I am not that worried about it as I just wanted them but I have a plan in mind for the other 2.

Well here it is Hoppy the man has done it again, wow I am impressed. I know these taps wouldn't be to every ones tastes but I love them.

20220621_154500.thumb.jpg.1cdc9ad6e55a7e6c8c223de473ea35a8.jpg

  • Like 5
Link to comment
Share on other sites

28 minutes ago, Classic Brewing Co said:

Well here it is Hoppy the man has done it again, wow I am impressed. I know these taps wouldn't be to every ones tastes but I love them.

20220621_154500.thumb.jpg.1cdc9ad6e55a7e6c8c223de473ea35a8.jpg

I reckon that they look great.

Link to comment
Share on other sites

2 hours ago, Classic Brewing Co said:

Well here it is Hoppy the man has done it again, wow I am impressed. I know these taps wouldn't be to every ones tastes but I love them.

20220621_154500.thumb.jpg.1cdc9ad6e55a7e6c8c223de473ea35a8.jpg

Anyoine for an IPA lol

seriously they look great mate

  • Haha 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...